Gluing Screen Part 3; Gluing Screen Part 4 - Horizon Fitness BQ-270 Manual

2-1
Entering the Job Information Using the Setting Screens
9
- -
Adjust the side gluing roller distance in increments of 0.1 mm (0.005"). The input
1
range is -1.0 mm to +5.0 mm (-0.040" to +0.195").
10 - -
Adjust the wiper opening of application drum 1.
1
Press once, and the opening increases by 0.1 mm (0.005"). The glue will pene-
trate farther into the spine. The adjustment range is +0.1 to +2.0 mm (+0.005" to
+0.080").
Adjust the wiper opening of application drum 2.
2
Press once, and the opening increases by 0.1 mm (0.005"). More glue will be
applied to the spine. The adjustment range is +0.1 to +2.0 mm (+0.005" to +0.080").
CAUTION
The wiper opening adjustment should not
be used to adjust the spine glue thickness.
But when the opening is set 0.5 mm (0.02")
or less, glue may not be applied to the book
spine at all.

Gluing Screen Part 3

P. 3
The side gluing roller distance should not
be used for adjustment of the side glue
amount. This adjust the side gluing roller to
1
correct position depending on the booklet
thickness.

Gluing Screen Part 4

P. 4
1
2
17
CAUTION