Horizon Fitness BQ-270 Manual page 108

8-1 Installation
Place a foot under the fourth level-
ing bolt shown in the illustration
below.
- Lower the leveling bolt until it hits the foot.
- Turn the leveling bolt 90 degrees more after it
hits the foot.
Top View
Lock each leveling bolt using the
lock nut.
Lock Nut
Leveling Bolt
Foot
Attach the spacer and the adapter.
- Attach the spacer and the adapter on the right
side of the machine and fix with the screw.
Spacer
Mouth
Attach the trimmings bag.
- Attach the trimmings bag on the adapter and
tie it with the string.
Install the touch panel.
- Remove the top plate and install the panel
with four screws as shown below.
Wire the touch panel.
- Install the ground from the touch panel to the
position as shown below.
- Connect the cables shown below to the CON3
and CON4 on the touch panel P.C.Board.
102
Ground
CON3
CON4