Home Positioning Screens; Milling Brake Release Screen - Horizon Fitness BQ-270 Manual

2-6 Using the Single Operation Screens
4
-
1
1
Press the
(There are conditions which could cause part of the machine to lose its home posi-
tion.)
5
-
This is the brake release button for the milling motor. The milling motor can not be
1
released by pressing the brake release button on the machine until this button is
pressed. Use this button when replacing the milling cutter or the roughening cutter.
Home Positioning Screen
1
button for the section which you want to send to the home position.

Milling Brake Release Screen

1
32