Milling Section - Horizon Fitness BQ-270 Manual

1-3 Parts Descriptions

1-3-3 Milling Section

Rear Milling Guide
Upper Knife
This guide holds the book
spine while the milling
operation is done.
Front Milling Guide
This guide holds the book spine
while the milling operation is done.
Brake Release Button
This button is used when
replacing the milling cutter.
This button works only after
pressing the brake release
button on Touch Panel Screen.
Guide Block
This block transports the power
from the motor to the front milling
guide.
Milling Select Lever
When milling the book spine,
this lever is used to turn the milling
operation ON or OFF. Set the lever
to the left to turn off the milling operation.
3