Nipping Section - Horizon Fitness BQ-270 Manual

1-3 Parts Descriptions

1-3-5 Nipping Section

Rear Jog Guide
Before the cover sheet
is fed, the side guide
waits 3 mm (0.12") away
from the edge of the sheet.
It registers the cover with the
front side guide before the
nipping operation.
Rear Nipper
This forms the book
spine with the front
nipper.
Front Nipper
Front Jog Guide
Before the cover sheet is fed, the side
guide waits 3 mm (0.12") away from the
edge of the sheet. It registers the cover
with the rear side guide before the nipping
operation.
Nipper Angle Adjusting Block
Refer to [4-11] for details.
Upper Cover Guide
Set to match the
cover sheet size.
Registration Stopper
Transport Belts
Registers the cover
Transport the cover sheets.
sheets to the right.
Registration Stopper
Angle Adjusting Lever
This lever is used to adjust
the cover sheet angle.
Refer to [4-12] for details.
Nipper Height Adjusting Ring
This ring is used to adjust the
book spine sharpness.
Refer to [4-10] for details.
5