Every Day Check Up; Glue Level Check; Level Plate Cleaning Check - Horizon Fitness Perfect Binder BQ-260 Manual

3. Before Starting Operation

3-2 Every Day Check Up

3-2-1 Glue Level Check

Before start binding, glue level in melt tank
must be checked.
WARNING
Keep off your hands or fingers from
melt tank. Melt tank is heated up to
around 200˚C. High temperature can
cause severe skin burn.
CAUTION
Do not supply glue more than Red Line
on melt tank glue level scale.
NOTE
Check glue level when glue is melted.
1.
When glue lower limit mark in melt tank
appears, glue level is not enough for bind-
ing.
NOTE
See "7-1 Glue Supply" (Page 54) when you
supply glue.

3-2-2 Level Plate Cleaning Check

Before start binding, surface of level plate
must be cleaned.
1.
Check level plate with your eyes
whether paper dust or glue stick on level
plate.
NOTE
See "7-2-2 Level Plate Clean Up" (Page 56)
when cleaning of level plate is necessary.
Melt Tank Glue Level Scale
Red Line
CAUTION
Keep glue level
below red line.
18
Glue Lower Limit Mark
Level Plate