Cover Sheet Size Screen - Horizon Fitness BQ-270 Manual

2-1
Entering the Job Information Using the Setting Screens
4 - -
3
Input the cover sheet length in increments of 0.1 mm (0.005"). The input range is
1
230.0 to 660.0 mm (9.055" to 25.985").
Input this setting first on this screen.
Input the length between the cover sheet rear edge and the spine (using either
2
edge, or the center of the spine). The input range is shown in illustration below.
or : Either edge of the spine
: Center of the spine.
Input the cover sheet width in increments of 0.1 mm (0.005"). The input range is
3
135.0 to 320.0 mm (5.315" to 12.600").
When measuring the distance to the center of the spine, use the accessory
alignment plate.

Cover Sheet Size Screen

1
2
Center of the Spine
13
Movable Side
Fixed Side
Downstream
Scoring Scoring
(Front Side)
(Rear Side)
110 to 310 120 to 350
(4.33" to 12.20) (4.72" to 13.77")
230 to 660
(9.05" to 25.98")
mm(inch)
If the dimension is out of this range, the front
or rear guides may not reachthe cover sheet edge.
Alignment Plate