Setting The Main Binding Screen - Horizon Fitness BQ-270 Manual

3-4 Setting the Main Binding Screen

This section explains the steps necessary to set the
production speed and the counter function.
Go to the Main Binding Screen.
Binding counter
This area can display both the
binding counter and the pre-set counter.
When using the pre-set counter,
press
- The Numeric Keypad Screen appears. Input
the pre-set number and press ent.
- Press the right part of
the pre-set number using the Numeric Keypad
Screen.
When the machine reaches the pre-set
number of bindings, it will stop feeding
the next cover sheets. This prevents the
machine from scoring additional cover
sheets once it reaches the pre-set num-
ber.
Select the production speed.
- The production speed can be selected from
five steps.
- When binding thick book blocks, use a slower
setting.
If you are binding a thick book block
and the production speed is set too
fast, the milling can not be completed
properly. On the other hand, if the pro-
duction speed is set too slow, the side
glue will dry and the binding quality will
deteriorate.
.
to change
When using the cover sheet with
window or hole, enter the number
of the window (hole) using Cover
Sheet Fine-adjust Screen Part5.
- There is a sensor which detects the window
(hole) at 58 mm rear side from the rear regis-
trating position.
- Enter the number of the window (hole) or
reposition covers and book block so that the
window (hole) on the cover does not pass
over the sensor.
Window
The settings on this screen are now complete.
Go to the [Scoring Roller Setting] on next page.
40
sensor
58mm
Cover Sheet