Adding More Cover Sheets - Horizon Fitness BQ-270 Manual

3-9 Adding More Cover Sheets

As the stack of cover sheets is reduced during the job,
add more cover sheets.
Press the Stop button on the Bind-
ing Screen.
- The machine stops and the feed table lowers.
Move the end guide to the right.
Stack more cover sheets on the
feed table.
- Separate the cover sheets well before stack-
ing. If the cover sheets are not separated, this
can cause double feeding, or the cover sheets
may be partially fed.
- If it is difficult to stack the cover sheets,
remove the end guide on the right.
- Place the sheets in the correct orientation.
End Guide
Feed Table
47
Move the end guide against the
right edge of the stack.
Press both Start buttons.
- The milling cutter rotates, and the feed table
rises.
Restart the binding operation.