Information Screen - Horizon Fitness BQ-270 Manual

2-7 Information Screen

These screens are used to set some machine operating functions. And also you can access
the Information Screen which shows the ROM version and the total binding number from this
screen. When you call your local dealer to service the machine, our operator may ask the
ROM version or total binding number. In that case, refer to the Information Screen.
The control ROM version is indicated here.
1
The panel ROM version is indicated here.
2
The total binding number is indicated here.
3
: The feed table is lowered when double feeding is detected.
4
: The feed table is not lowered when double feeding is detected.
: When changing the binding mode, the milling operation is set automatically
5
depending on the selected binding mode.
: When changing the binding mode, the milling operation is set manually
by operator.
The full detection function is use/ is not use at delivery section.
6
7 : The jog guides are opened when the cover sheet is moved back to the registration stopper.
: The jog guides are closed when the cover sheet is moved back to the registration stopper.
1
2
3
4
5
6
33
7