Cover Sheet Fine-Adjust Screen Part 2; Cover Sheet Fine-Adjust Screen Part 3 - Horizon Fitness BQ-270 Manual

2-4 Fine Adjustment
10
- -
This allows for fine adjustment of the cover sheet stack position.
1
: This increases the positioning guide spacing on the feed table.
1
: This decreases the positioning guide spacing on the feed table.
These can be set by 0.1 mm (0.005"). The input range is -10.0 mm to +10.0 mm
(-0.395" to +0.395").
11
- -
This sets the pressure produced by the transport belts. After the cover sheets are fed
1
by the feed rotor, the transport belts feed the covers back to the registration stopper.
The pressure of the transport belt is adjustable in five steps. Normally, use a loose
setting when using thin sheets and use a tight setting when using thick sheets. The
standard setting is
This adjusts the vacuum to the feed rotor when feeding the stacked sheets. If double-
2
feeding occurs often, make the vacuum weaker. If mis-feeding occurs often, make the
vacuum stronger. The standard setting is
-

Cover Sheet Fine-Adjust Screen Part 2

P. 2
-

Cover Sheet Fine-Adjust Screen Part 3

P. 3
Transport Belt
1
Registration Stopper
2
.
27
Cover Pile Position Adjustment
.