1. Machine Description
1-1 Machine Description
Touch Screen
Used to input necessary
information and operate the
machine.
Carriage Clamp
Clamps the book block.
Level Plate
Registers the bottom of the
sheet block.
Delivery Section
Stacks the bound booklets
vertically.
1-2 Safety Functions
Area Sensors
The machine stops if
this light between the
sensors are cut.
Emergency Stop Button
The machine stops if
this button is pressed.
Power Switch
Safety Cover (left)
The machine stops if
this cover is opened.
1
Milling Section
Mills the book spine.
Melt Tank Section
Applies glue to the book spine.
Nipping Section
Pastes the cover sheet on the
book spine and forms the spine.
Cover Feed Section
Feeds the cover sheet
to the nipping section.
Trimmings Bag
Collects the trimmings.
Glue Temperature Adjusting Knob
Adjusts the glue temperature
from 120 to 180
(248 to 356
).
Milling ON/OFF Lever
Turns the milling operation ON or
OFF. Turn the lever to the right
to select milling ON.
Turn to the left to select milling
OFF.
Safety Cover (right)
The machine stops if
this cover is opened.
Lower Nipper Door
The machine stops if
this door is opened.