Gluing Screen Part 1; Gluing Screen Part 2 - Horizon Fitness BQ-270 Manual

2-1
Entering the Job Information Using the Setting Screens
7
-
1
2
: The glue amount, wiper opening, nipping time and the nipping delay time is
1
set automatically depending on the book block thickness.
: The spine glue amount is set on the Gluing Part 2 and Gluing Part 4 screens.
: Side glue will be applied. If you select
2
Gluing Screen Part 3.
: Side glue will not be applied.
8
-
Adjust the spine glue thickness in increments of 0.1mm (0.005"). The adjustment
1
range is 0 to +4.0 mm (0.155").
Adjust the starting point to apply the spine glue. The adjustment range is -20.0 mm to
2
+20.0 mm (-0.785" to +0.785").
Adjust the end point for the spine glue. The adjustment range is -20.0 mm to +20.0
3
mm (-0.785" to +0.785").
-

Gluing Screen Part 1

P. 1
-

Gluing Screen Part 2

P. 2
(Available when selecting
1
2
3
, set the glue amount using the
16
on Gluing Screen Part 1)