After Use; Cleaning And Maintenance; External Cleaning; Cleaning The Vacuum Chamber - Orved Evox 31 Hi-Line Operating And Service Manual

AFTER USE / CLEANING AND MAINTENANCE

10. AFTER USE

• Switch off the machine by pressing for 2".
• Clean and dry the packaging machine and the accessories used.
• When the vacuum chamber is completely dry, close the lid.

11. CLEANING AND MAINTENANCE

• For cleaning, do not use stainless steel sponges, scrapers, abrasive, acid or aggressive materials which may irreversibly
damage the surfaces.
• Use a soft cloth and a mild detergent.
• Switch off the machine by pressing for 2".

11.1 External cleaning

• For steel parts it is advisable to clean by following the direction of the satin finish.
• For the lid and front control panel, use a soft, clean and damp cloth.

11.2 Cleaning the vacuum chamber

1) Wait until the sealing bar has cooled down
2) Remove the sealing bar by pulling it upwards
3) Avoid cleaning the intake opening with water. If aspirated, the water may cause damage to the packaging machine.
4) Remove any dirt with a soft cloth moistened with warm water. If required, use a neutral disinfectant.
5) Dry with a soft cloth.

11.3 Cleaning the sealing bar

1) Wait until the sealing bar has cooled down.
2) Remove the sealing bar by pulling it upwards.
3) Clean with a soft cloth moistened with warm water.
4) Dry thoroughly before using the packaging machine.
11.4 External vacuum adapter cleaning
1) Use hot water and dishwasher detergent.
2) Rinse thoroughly.
3) Dry with a clean cloth.
4) Only reuse the adaptor once it has completely dried.

11.5 Pump oil dehumidification cycle (H2OUT)

The vacuum pump is the heart of the machine. Sometimes, the products are packed at inappropriate temperatures, i.e.
well over 3°C, which cause a high quantity of moisture to be drawn together with the air. The moisture in the form of water
vapour remains inside the pump and turns into water as soon as the pump cools down. Especially when the machine is
not used for a long time, the water oxidises the internal surfaces of the pump, thereby forming residue that can cause
the rotor or blades to block in certain cases.
Evox 31 warns you:
a) Everytime you vacuum pack too warm or too liquid products through this warning light .
evox 31
29
Rev. 02 - 06/2018 - Cod. 1500339 - Vacuum packaging machine user manual
Hi-Line