If the power cord is damaged, it must be replaced by an authorised service centre. • _______________________________________________________________________________________ _______________________________________________________________________________________ ORVED S.P.A Rev.01 – 09/2019 – cod. 1500735-00EN – User Manual for IDEA vacuum packing machines Pag. 4 a 76 ORVED S.P.A Rev.01 – 09/2019 – cod. 1500735-00EN – User Manual for...
_______________________________________________________________________________________ _______________________________________________________________________________________ ORVED S.P.A Rev.01 – 09/2019 – cod. 1500735-00EN – User Manual for IDEA ORVED S.P.A Rev.01 – 09/2019 – cod. 1500735-00EN – User Manual for IDEA vacuum packing machines Pag.
Page 5
WARNING! DO NOT touch the sealing bars soon after sealing the bags, as they could be still hot. _______________________________________________________________________________________ _______________________________________________________________________________________ ORVED S.P.A Rev.01 – 09/2019 – cod. 1500735-00EN – User Manual for IDEA vacuum packing machines Pag. 8 a 76 ORVED S.P.A Rev.01 –...
10% – 99% ADDITIONAL VACUUM 1 – 60 sec SEALING 0,1 – 6,0 sec 6 Command panel: Idea 30 – idea 40 – idea 31 – idea 41 GAS ( IDEA31 - IDEA41) 1 – 90% CAUTION! It is necessary to carry out preliminary tests, to identify the optimal percentage of GAS to be injected, for every single product to be packed.
Open the lid and make sure the vacuum chamber and product to be packaged are 7 how to operate with idea 30 – 40 - Idea 31 – 41 dry. Take care not to dirty or wet the inner part CAUTION! near the bag opening.
Page 8
Lower the lid using both hands, by pressing on the corners. The vacuum cycle starts automatically. _______________________________________________________________________________________ _______________________________________________________________________________________ ORVED S.P.A Rev.01 – 09/2019 – cod. 1500735-00EN – User Manual for IDEA vacuum packing machines Pag. 14 a 76 ORVED S.P.A Rev.01 –...
To vacuum pack products externally, it is necessary to use channelled vacuum bags (for preservation or for cooking), that can be ordered to the dealer or directly to Orved S.p.A. Pay attention that not all the vacuum bags available on the market are suitable for this use.
Page 11
UP/DOWN buttons again to set the additional vacuum level between 1” and 60”. _______________________________________________________________________________________ _______________________________________________________________________________________ ORVED S.P.A Rev.01 – 09/2019 – cod. 1500735-00EN – User Manual for IDEA vacuum packing machines Pag. 20 a 76 ORVED S.P.A Rev.01 – 09/2019 – cod. 1500735-00EN – User Manual for...
Page 12
Vacuum and press UP/DOWN to set a value between 10% and 99%. _______________________________________________________________________________________ _______________________________________________________________________________________ ORVED S.P.A Rev.01 – 09/2019 – cod. 1500735-00EN – User Manual for IDEA vacuum packing machines Pag. 22 a 76 ORVED S.P.A Rev.01 – 09/2019 – cod. 1500735-00EN – User Manual for...
Save the parameters settings and come back to previous screen. Copy a program _______________________________________________________________________________________ _______________________________________________________________________________________ ORVED S.P.A Rev.01 – 09/2019 – cod. 1500735-00EN – User Manual for IDEA vacuum packing machines Pag. 28 a 76 ORVED S.P.A Rev.01 – 09/2019 – cod. 1500735-00EN – User Manual for...
Percentage of injected Gas Allows to enter in Gas injection setting menu _______________________________________________________________________________________ _______________________________________________________________________________________ ORVED S.P.A Rev.01 – 09/2019 – cod. 1500735-00EN – User Manual for IDEA ORVED S.P.A Rev.01 – 09/2019 – cod. 1500735-00EN – User Manual for IDEA vacuum packing machines Pag.
In case the gas injection is required, insert the gas nozzle in the bag open part (E). _______________________________________________________________________________________ _______________________________________________________________________________________ ORVED S.P.A Rev.01 – 09/2019 – cod. 1500735-00EN – User Manual for IDEA vacuum packing machines Pag. 32 a 76 ORVED S.P.A Rev.01 – 09/2019 – cod. 1500735-00EN – User Manual for...
Page 18
Press +/- buttons, to set a sealing time from 0” 8a.4 to 6” _______________________________________________________________________________________ _______________________________________________________________________________________ ORVED S.P.A Rev.01 – 09/2019 – cod. 1500735-00EN – User Manual for IDEA vacuum packing machines Pag. 34 a 76 ORVED S.P.A Rev.01 – 09/2019 – cod. 1500735-00EN – User Manual for...
End of cycle. The lid opens automatically. Remove the container. _______________________________________________________________________________________ _______________________________________________________________________________________ ORVED S.P.A Rev.01 – 09/2019 – cod. 1500735-00EN – User Manual for IDEA vacuum packing machines Pag. 38 a 76 ORVED S.P.A Rev.01 – 09/2019 – cod. 1500735-00EN – User Manual for...
9.4.2 Single step parameter settings Enter the single step setting menu (vacuum and pause) _______________________________________________________________________________________ _______________________________________________________________________________________ ORVED S.P.A Rev.01 – 09/2019 – cod. 1500735-00EN – User Manual for IDEA vacuum packing machines Pag. 42 a 76 ORVED S.P.A Rev.01 – 09/2019 – cod. 1500735-00EN – User Manual for...
Press the correspondent icon to modify the sealing time, if necessary. _______________________________________________________________________________________ _______________________________________________________________________________________ ORVED S.P.A Rev.01 – 09/2019 – cod. 1500735-00EN – User Manual for IDEA vacuum packing machines Pag. 44 a 76 ORVED S.P.A Rev.01 – 09/2019 – cod. 1500735-00EN – User Manual for...
Remove the packed products, paying attention not to touch the sealing bar, as it may be still hot End of cycle. The lid opens automatically. Remove the container. _______________________________________________________________________________________ _______________________________________________________________________________________ ORVED S.P.A Rev.01 – 09/2019 – cod. 1500735-00EN – User Manual for IDEA vacuum packing machines Pag. 46 a 76 ORVED S.P.A Rev.01 –...
Gas failure: the alarm appears when the machine detects anomalies in inert GAS ALL GAS inlet system. _______________________________________________________________________________________ _______________________________________________________________________________________ ORVED S.P.A Rev.01 – 09/2019 – cod. 1500735-00EN – User Manual for IDEA vacuum packing machines Pag. 50 a 76 ORVED S.P.A Rev.01 – 09/2019 – cod. 1500735-00EN – User Manual for...
ELECTRICAL HAZARD! Never use running water or steam cleaning equipment: Electric shock hazard! _______________________________________________________________________________________ _______________________________________________________________________________________ ORVED S.P.A Rev.01 – 09/2019 – cod. 1500735-00EN – User Manual for IDEA vacuum packing machines Pag. 52 a 76 ORVED S.P.A Rev.01 – 09/2019 – cod. 1500735-00EN – User Manual for...
Press the STAND-BY button, to turn the machine on. _______________________________________________________________________________________ _______________________________________________________________________________________ ORVED S.P.A Rev.01 – 09/2019 – cod. 1500735-00EN – User Manual for IDEA vacuum packing machines Pag. 54 a 76 ORVED S.P.A Rev.01 – 09/2019 – cod. 1500735-00EN – User Manual for...
DANGER! It is strictly prohibited to remove the guards and safety devices to perform routine ERRORE PROBLEM POSSIBLE CAUSES SOLUTION maintenance. Orved S.p.A. declines all liability for accidents due to non-compliance with Switch the machine on (press Machine off the above-mentioned obligation. STOP button for 5”) ...
• The most recommended level corresponds with the centreline of the inspection window. WARNING! Never start the machine in case there is no oil in the pump! _______________________________________________________________________________________ _______________________________________________________________________________________ ORVED S.P.A Rev.01 – 09/2019 – cod. 1500735-00EN – User Manual for IDEA vacuum packing machines Pag. 60 a 76 ORVED S.P.A Rev.01 –...
Insert and remove the plug by pulling the plug itself and not the wire. It is prohibited to remove the guards and safety devices in order to carry out maintenance operations. Orved S.p.A. declines all liability for accidents due to non-compliance with the WARNING! above-mentioned obligation.
Lift the machine body using both hands (rotating it 90°) and lay it on the front (on the work table), resting it on one of the filler plates. _______________________________________________________________________________________ _______________________________________________________________________________________ ORVED S.P.A Rev.01 – 09/2019 – cod. 1500735-00EN – User Manual for IDEA vacuum packing machines Pag. 64 a 76 ORVED S.P.A Rev.01 –...
6) Insert the new gas spring from below. _______________________________________________________________________________________ _______________________________________________________________________________________ ORVED S.P.A Rev.01 – 09/2019 – cod. 1500735-00EN – User Manual for IDEA vacuum packing machines Pag. 68 a 76 ORVED S.P.A Rev.01 – 09/2019 – cod. 1500735-00EN – User Manual for...
S.p.A. having been promptly notified. LC12/ 12 LC20/20 b) Changes made to the device or its parts without the prior written consent of Orved S.p.A. In addition to Pump mode/flow rate [m BUSCH KB0010/10 KB0020D20/20 invalidating the warranty, any tampering with the device or its parts shall relieve Orved S.p.A. of all liability Room temperature of use °C...
Manufacturer: Orved S.p.A. con SOCIO UNICO Tel.: +39 0421 54387 • Fax: +39 0421 333100 • E-mail: orved@orved.it • http: www.orved.it Nearest authorized service center: Company name: ___________________________________________________________________________________ Address: _________________________________________________________________________________ Telephone: _________________________________________________________________________________ Fax: _____________________________________________________________________________________ 22 Spare parts To get technical assistance and order spare parts, subscribe for free to: http://www.orved.it/service/...