Main Gear Shift Lever & Range Gear Shift Lever; Front Wheel Drive Lever - Kubota L2501 Operator's Manual

24 OPERATING THE TRACTOR
6. Selecting the Travel Speed.
[Manual Transmission Type]
(1) Main gear shift lever
(2) Range gear shift lever
(Shuttle shift lever)

(3) Front wheel drive lever

BMain Gear Shift Lever & Range Gear Shift
Lever
The main gear shift lever pattern is in the form of a "H".
The range gear shift lever moves in the form of a " " in 3
stages, "HIGH", "LOW" and "REVERSE".
By combination and use of the main gear shift lever and
the range gear shift lever, 8 forward speeds and 4 reverse
speeds are obtained.
A To change speeds, press the clutch pedal completely
down and stop the tractor before attempting to
proceed with speed change.
A When you stand up from the seat with the range gear
shift lever at "FORWARD" or "REVERSE", the engine
will stop regardless of whether the machine is moving
or not.
This is because the tractor is equipped with Operator
Presence Control system (OPC).
(L) "LOW"
(N) "NEUTRAL"
(H) "HIGH"
(R) "REVERSE"
BFront Wheel Drive Lever
[4WD]
To avoid personal injury or death:
A Do not engage the front wheel drive when
traveling at road speed.
A When driving on icy, wet, or loose surfaces,
make sure the tractor is correctly ballasted to
avoid skidding and loss of steering control.
Operate at reduced speed and engage front
wheel drive.
A An accident may occur if the tractor is
suddenly braked, such as by heavy towed
loads shifting forward or loss of control.
A The braking characteristics
between 2 and 4-wheel drive. Be aware of the
difference and use carefully.
are different