Lubricants, Fuel And Coolant - Kubota M7132 Operator's Manual

MAINTENANCE

LUBRICANTS, FUEL AND COOLANT

No. Locations
1 Fuel
®
2 DEF/AdBlue
3 Coolant
4 Washer liquid
Engine crankcase (with
5
filter)
6 Transmission case
7 Rear axle case oil
8 Front differential case oil
9 Front axle gear case oil
10 Front PTO case
Greasing
Top link
Lift rod
Stabiliser
Universal joint (front
axle drive shaft)
11 Front axle support
Hydraulic lift cylinder pin
Hydraulic lift arm shaft
Parking brake shaft
Front 3-point hitch (if
equipped)
Battery terminal
NOTE :
• The product name of KUBOTA genuine UDT fluid may be different from that in the operator's manual
depending on countries or territories. Consult your local KUBOTA Dealer for further details.
Engine oil
• The oil used in the engine should have an American Petroleum Institute (API) service classification and proper
SAE engine oil according to the ambient temperatures shown in the previous table.
• Refer to the following table for the suitable API classification engine oil according to the diesel particulate filter
(DPF) type engines and the fuel.
Ultra Low Sulphur fuel
(<0.0015% (15 ppm))
252
Capacities
M7132 M7152
330 L
38 L
24 L
2 L
22 L
Power shift model: 85 L
CVT model: 80 L
10 L for each side
8.5 L
2.1 L for each side
2.7 L
No. of greasing points
2
4
2 (with automatic stabiliser)
1
2
4
2
2
7
2
Fuel used
M7172
No.2-D S15 diesel fuel
No.1-D S15 diesel fuel if temperature is below -10 ℃
Fresh clean soft water with antifreeze
Car washer liquid
• Engine oil:
API Service Classification
Above 25 ℃
-10 to 25 ℃
Below -10 ℃
KUBOTA UDT fluid*
• KUBOTA UDT fluid* or KUBOTA 80W-90 gear lubricant HD
or KHD
• KUBOTA UDT fluid*
Capacity
Until grease overflows.
A small amount
Engine oil classification (API classification)
Oil class for engines with DPF
LUBRICANTS, FUEL AND COOLANT
Lubricants
CJ-4 (DPF type engine)
SAE30, SAE10W-30 or
15W-40
SAE10W-30 or 15W-40
SAE10W-30
Type of grease
Multipurpose grease NLGI-2 or
NLGI-1(GC-LB)
CJ-4
M7132, M7152, M7172