Komatsu PC118MR-8 Operation And Maintenance Manual page 163

FUNCTIONING
3. Seize the right and left handles (A) and pull down the
locking lever (B) to release the stop.
4. Seize the handle (C) at the bottom of the front glass with
your left hand and the handle (D) on the upper part of the
same with your right hand, push forward, then lower slowly.
5. When the bottom of the windscreen reached the top of the
lower pane, push the top of the windscreen forward against
the right and left hand latches (G) then fit the clip.
6. Make sure that the safety lever is in the LOCK position (L).
q The retainer has been correctly fitted if the arrow on
the retainer (F) corresponds to the arrow on the locking
lever (B).
q If the arrow on the retainer (F) does not correspond to
the arrow on the locking lever (B), this means that the
retainer hasn't been fitted correctly. To engage the
retainer correctly, repeat the operation described at
point 5.
WEAM014802
CAB
3-79