Komatsu PC118MR-8 Operation And Maintenance Manual page 157

FUNCTIONING
(5) Blade control lever
Before moving the machine, make sure that the blade is completely raised.
The lever (5) is used to control the blade.
(a) Lower
(b) Lift
(6) Boom swing control pedal lock
Always shift the safety lever to LOCK position (L) when the boom swing is not required, during travel and
when parking the machine. If the control pedal is inadvertently pressed, this may cause serious accidents.
This device is used to lock the movements of the boom swing
control pedal.
WARNING
WARNING
WEAM014802
INSTRUMENTS AND CONTROLS
3-73