Komatsu PC118MR-8 Operation And Maintenance Manual page 132

INSTRUMENTS AND CONTROLS
2. From the ATT - 2-way Attachment selection menu, select
one of the two values set for oil flow rate and press F6.
q The default oil flow rate values are both set at 130
litres/min, as shown to the right.
To select the oil flow rate, follow the procedure
described in "USING THE FUNCTION KEYS (3-34)".
q The oil flow rate currently set for ATT mode is
h ig h l i gh t ed b y AT T/ P or ATT /E i n fro n t o f t h e
corresponding parameter.
q If No 2-Way Attachment is selected, "attachment"
mode cannot be selected in the working mode
selection screen.
In the working mode selection screen, "No 2-Way Attachment"
cannot be selected.
From the ATT - 2-way Attachment selection menu, the
following operations are possible using function keys F3 to F6.
q F3: Select next entry (1 row down).
q F4: Select previous entry (1 row up).
q F5: Return to previous screen.
q F6: Display settings screen for selected parameter.
3-48
WEAM014802
FUNCTIONING