Komatsu PC118MR-8 Operation And Maintenance Manual page 212

USE OF THE MACHINE AND RELATED CONTROLS
Operations to be carried out before starting the engine
q When starting the engine, make sure that the safety lever is in the LOCK position (L).
q If the control levers are not locked and are inadvertently touched when the engine is started, the work
equipment may move suddenly and cause serious accidents.
1. Make sure that the safety lever (1) is in the LOCK position
(L).
REMARK
If the safety lock lever is not at LOCK position (L), the engine
will not start.
2. Make sure that all control levers are in neutral.
3. Insert the key in the ignition switch (2), turn the key to
position ON, then carry out the following checks.
q If a password has been set, the password entry screen
appears on the monitor. Press Enter F6 (3) after entering
the password.
REMARK
For details on setting, modifying or cancelling the password,
see document "Procedure for setting, modifying or cancelling
the password".
3-128
WARNING
WEAM014802
FUNCTIONING
3