Komatsu PC118MR-8 Operation And Maintenance Manual page 102

INSTRUMENTS AND CONTROLS
INSTRUMENTS AND INDICATORS
Indicator light bar
(1) Engine preheating warning light
(2) Slew lock indicator light
(3) Windscreen indicator light
(4) Automatic engine speed limiter system indicator light
(5) Operating mode indicator light
(6) Travel speed warning light
(7) Air conditioner indicator light
(8) Message indicator
(9) Standby at idle indicator light
Indicators and counters
Indicator light bar
q The indicator light bar at the top of the monitor contains the indicator lights relative to the status of the different
functions.
q When the ignition key is turned to ON, the indicator lights relative to currently active functions illuminate.
(1) Engine preheating warning light
This indicator light (1) is displayed when the engine pre-heat
procedure is performed with temperatures below 0°C.
In very cold conditions, turn the ignition key to HEAT, the pre-
heating indicator light illuminates. After remaining lit for
approximately 30 seconds, the indicator light flashes to inform
the operator that the pre-heat procedure is complete. After
flashing for approx. 10 seconds, the monitor goes out.
3-18
3
(10) Engine coolant temperature indicator
(11) Hydraulic fluid temperature gauge
(12) Fuel gauge
(13) Hour counter, clock
(14) ECO gauge
WEAM014802
FUNCTIONING