Komatsu PC118MR-8 Operation And Maintenance Manual page 361

MAINTENANCE
4. Place a container under the hose (3) and remove the oil
drain plug (4).
5. Refit the plug (4), making sure the gasket is intact.
6. Remove the dipstick (G) and proceed with the filling.
Use oil of the prescribed type (for details see "FUEL,
COOLANT AND LUBRICANTS (4-12)").
7. Insert the stick (G) completely into the filler pipe (F) and
make sure the oil level lies between the marks L and H.
8. If the oil level is below the mark L of the dipstick, top up the
oil through the hole (F) in the stick (G).
9. If the oil level is above the mark H, drain the excess oil
after removing the plug.
10. Refit the cover (1) and the protection (2).
WEAM014802
MAINTENANCE PROCEDURES
4-75