Komatsu PC118MR-8 Operation And Maintenance Manual page 403

OPTIONAL EQUIPMENT
5. Open the side cover (1).
6. Open the lock (2).
7. Slowly loosen the filling cap (3) to release the remaining
pressure of the tank.
8. Remove the tubes accessory side. Install the caps on their
two holes.
The caps are used to avoid inconveniences to the
accessory functioning if any foreign matter comes in. After
having correctly installed the caps, store the accessory.
9. Remove the mounting pins (2 points), remove the
accessory and reinstall the bucket.
For details on the procedure of bucket removal, see
"BUCKET REPLACEMENT AND INVERSION (3-169)".
10. After installing the bucket, check the oil level in the
hydraulic reservoir. and top up, if necessary.
11. Tighten the cap (3) and lock (2).
WEAM014802
EQUIPMENT USE GUIDE
6-13