Komatsu PC118MR-8 Operation And Maintenance Manual page 162

CAB
6. Pull it upwards and push it against the retainer (E) until
engaging the glass.
7. Make sure that the safety lever is in the LOCK position (L).
REMARK
q The retainer has been correctly fitted if the arrow on the
retainer (F) corresponds to the arrow on the locking lever
(B).
q If the arrow on the retainer (F) does not correspond to the
arrow on the locking lever (B), this means that the retainer
hasn't been fitted correctly. To engage the retainer
correctly, repeat the operation described at point 5.
Closing
When closing the windshield, lower it slowly and pay attention to your hands.
1. Stop the machine on a level surface, lower the equipment
completely to the ground, then stop the engine.
2. Shift the safety lever to the LOCK position (L).
3-78
WARNING
WEAM014802
FUNCTIONING
3