Komatsu PC118MR-8 Operation And Maintenance Manual page 128

INSTRUMENTS AND CONTROLS
2. From the breaker oil flow rate setting screen, select one of
the two set values and press F6.
q The default oil flow rate values are both set at 130
litres/min, as shown to the right.
The oil flow rate currently set for B mode is highlighted
by a B in front of the corresponding parameter, as
shown to the right.
In the "breaker" selection menu and the "breaker" oil flow rate
setting screen, the following operations are possible using keys
F3 to F6.
q F3: Select next entry (1 row down).
q F4: Select previous entry (1 row up).
q F5: Return to previous screen.
q F6: Display settings screen for selected parameter.
3-44
WEAM014802
FUNCTIONING