Komatsu PC118MR-8 Operation And Maintenance Manual page 265

FUNCTIONING
8. Lift the working tools, retract the arm under the boom and
move the machine slowly.
9. Once the machine is in horizontal position on the rear
wheels of the trailer, stop the machine.
NOTICE
q When the machine is unloaded, the boom and the arm
must be at an angle between 90° - 110°.
If it is unloaded with the arm retracted, the machine
may get damaged.
q While getting off the ramps, do not press the bucket
against the ground. Doing so may damage the
hydraulic cylinders.
10. If it is moved from the rear part of the trailer onto the
ramps, keep the angle between both booms between 90°
and 110°, lower the bucket down to the ground and move
the machine slowly.
11. While getting down the ramps, move the boom and the amr
slowly and carefully to lower the machine until it completely
leaves the ramps.
WEAM014802
TRANSPORTATION
3-181