Komatsu PC118MR-8 Operation And Maintenance Manual page 72

SAFETY MACHINE OPERATION
q The lifting link RLL (Rated Lifting Load) and part number
(A) are stamped on the link as shown below.
q All components in the load line (eg.chains, shackles etc.)
must be rated correctly for the load to be lifted.
q When swinging or operating the work equipment, check
carefully that the surrounding area is clear from objects,
structures or any persons working around the machine.
q During lifting operations, reduce the engine speed and
carry out the operation in L mode.
q Never travel the machine while lifting a load.
q Do not swing or operate the work equipment suddenly.
There is a danger that this may cause the load to swing
and the machine to become unstable or tip over.
q Do not leave the operator seat when there is a raised load.
q Do not use the work equipment or swing to pull the load in
any direction.
There is a danger that the lifting eye may be damaged due
to abnormal loading making it unsafe to lift.
2-48
WEAM014802
SAFETY