Komatsu PC118MR-8 Operation And Maintenance Manual page 121

FUNCTIONING
Operations available in reset service interval screen
From the maintenance screen, press and hold F6 for at least 1.5 seconds to call up the reset service interval
screen.
Reset the remaining time from this screen.
1. When the reset screen appears as show in the figure to the
right, press F6. The monitor displays the confirmation
screen.
REMARK
q Press F5 to cancel the reset operation. The monitor returns
to the maintenance screen.
q If no buttons are pressed for over 30 seconds when in the
reset screen, the monitor automatically returns to the
maintenance screen.
2. The confirmation screen show on the right is displayed.
3. Press F6 again to reset the remaining time and return to
the maintenance screen.
REMARK
q Press F5 to cancel the reset operation. The monitor returns
to the maintenance screen.
q If no buttons are pressed for over 30 seconds when in the
confirmation screen, the monitor automatically returns to
the maintenance screen.
WEAM014802
INSTRUMENTS AND CONTROLS
3-37