Komatsu PC118MR-8 Operation And Maintenance Manual page 194

USE OF THE MACHINE AND RELATED CONTROLS
9. Check the driver's post access handles and the steps to get on the machine. Make sure that there are no
damaged or loose bolts, repair any damaged parts and tighten any loose bolts.
10. Check the indicators and the machine monitor for any anomaly. If any anomaly is observed, provide for the
necessary repairs. Remove any trace of dirt from all surfaces.
11. Check whether the cab glasses are damaged. If they are damaged, carry out the necessary repair operations.
In particular, if a glass has broken during the machine operation, it must be immediately repaired. Do not
attempt to continue work if the necessary repairs have not been carried out.
12. Check and clean the rear-view mirror. Check the rear-view mirror for any anomaly and replace it with a new
one if it is damaged. Keep the rear-view mirror clean and adjust its inclination so that the rear lower part of the
machine (which cannot be seen because of the engine hood) is visible from the operator seat.
13. Check the seat belt and the relevant couplings. If there is any damage or anomaly, change them with new
ones.
3-110
WEAM014802
FUNCTIONING