Komatsu PC118MR-8 Operation And Maintenance Manual page 404

EQUIPMENT USE GUIDE
ACCESSORIES ACTIVATION
When the autodeceleration function is active and the engine speed is low, if the control lever is operated,
engine speed will increase abruptly; therefore, you should be especially careful.
q When the oil flow rate is changed for the "breaker" mode, consult point "USING THE FUNCTION KEYS (3-
34)" ("a. Breaker/attachment settings") ("Modifying "breaker" mode settings").
q When the oil flow rate is changed for the "accessories" mode (crusher or any other), consult point "USING
THE FUNCTION KEYS (3-34)" ("a. Breaker/attachment settings") ("Modifying "breaker" mode settings").
The accessories are activated as follows.
When the breaker is used
NOTICE
Use the "breaker" mode for any operations using the breaker. If the ATT mode is used, there is risk of
braking the breaker. Note that operations using the breaker are not allowed even under P, E, or L modes.
q Breaker activation button.
12. If the working mode warning light does not show B
("breaker" mode), press the selector of the working mode
(1) and adjust as follows.
REMARK
When the selector of the working mode (1) is pressed, the
monitor shifts to the working mode selection screen.
6-14
WARNING
WEAM014802
OPTIONAL EQUIPMENT
6