Komatsu PC118MR-8 Operation And Maintenance Manual page 246

USE OF THE MACHINE AND RELATED CONTROLS
2. When travelling uphill on a slope, position the work
equipment as shown in the diagram on the right.
Braking when travelling downhill
To brake when travelling downhill, shift the travel levers to the neutral position. This will automatically engage the
brakes.
When the engine stops on a slope
If the engine stops when the machine is travelling uphill, shift the travel levers to the neutral position, lower the
bucket to the ground, stop the machine, then start the engine again.
Precautions to be taken on slopes
q If the engine stops when the machine is on a slope, do not use the left work equipment control lever to swing
the turret. The turret will swing due to its own weight.
q Do not open or close the cab door during travel or when working on slopes.
q Always keep the cab door closed or locked in full open position.
3-162
WEAM014802
FUNCTIONING