Understanding Cell Loss Test Results; Exiting And Returning To A Test In Progress - Fluke OC3port Plus User Manual

Understanding Cell Loss Test Results

After you start a Cell Loss test, results are immediately displayed on the LCD.
Following is a sample Cell Loss test result display:
CELL LOSS TEST 8
LOST CELLS: 22746000
RATIO: 100.0000%
MISINSRT: NONE
This display provides you with the following information:
•
Indicates the number of times the Cell Loss test has been run.
Line 1
•
Provides a count of the number of cells lost.
Line 2
•
Provides the cell loss ratio (number of cells lost/number sent).
Line 3
•
Indicates the number of mis-inserted cells detected.
Line 4
If you press the
Left
are given on Line 4 of the display:
•
MIS RATE
•
ET
•
RECORD #
•
CELLS SENT

Exiting and Returning to a Test in Progress

To exit a test that is currently running, press any key (except the
and keys) while you are viewing test results on the LCD. You immediately
EDIT
exit the test in progress. However, the test continues to run in the background.
To return to the test in progress, do the following:
1. Press the
ATM
2. Press the
Down Arrow
line. Press
ENTER
3. Make sure that the
. The
ENTER CELL LOSS
4. Make sure that the
You return to the test in progress.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
or key, you can see these additional results, which
Right Arrow
The cell mis-insertion ratio.
The elapsed test time.
The number of result records stored.
The total number of test cells transmitted.
key to display the
ATM SELECTIONS
key to move the
Quality of Service
. The
QUALITY OF SERVICE
option is on the selection line. Then, press
Cell Loss
menu is displayed.
option is on the selection line. Press
Start Cell Loss
Testing ATM Networks
Quality of Service Tests
START / STOP
menu.
option to the selection
submenu is displayed.
ENTER
6
za148f.eps
.
6-65