Table of Contents
Advertisement
OC3port Plus
User Manual
Step 2: Specify the number of cells to expect in the trigger burst.
1. Press the
2. Press the
selection line. Then, press
displayed.
3. Press the
4. Press the
5. Press the
supplied when you set up TRANSMIT STREAM 1 on the master unit. Press
when you finish to save the change.
ENTER
The default form for expressing the
second (
MBS
per second (
the Form for the PCR and SCR" in Chapter 5.
6. Press the
7. Press the
supplied for MBS when you set up TRANSMIT STREAM 1 on the master
unit. Press
The slave unit is now configured with the number of cells to expect in the
trigger burst.
6-60
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
key. You return to the
ATM
key to move the
Down Arrow
. The submenu for
ENTER
key to display the submenu for
Right Arrow
key to move the
Down Arrow
TRANSMIT STREAM:
GFC 0
PCR:000037.44 MBPS
SCR:000000.00 MBPS
key and enter a value for
EDIT
Note
PCR
). You can change the form to a percent (%
). For information on how to do this, see "Changing
CPS
key to move the
Down Arrow
TRANSMIT STREAM:
SCR: 000000.00 MBPS
MBS: 0010 Cells
CDV LIM: 020.00 Cls
key and enter a value for
EDIT
when you finish to save the change.
ENTER
menu.
ATM SELECTIONS
option to the
Setup XMIT Streams
TRANSMIT STREAM 1
TRANSMIT STREAM 2.
option to the selection line, as in:
PCR
2
that matches the value you
PCR
value is in megabits per
) or cells
BW
option to the selection line:
MBS
2
that matches the value you
MBS
is
za147f.eps
za142f.eps
Advertisement
Table of Contents
