Running A 1-Point Cdv Test - Fluke OC3port Plus User Manual

OC3port Plus
User Manual
8 Press
ENTER
The default form for expressing the
second (
MBS
per second (
the Format for the PCR and SCR" in Chapter 5.
9. You are in Edit mode as indicated by the flashing number in the first position
of the
PCR
you finish, press
You have completed the setup for a 1-point CDV test.

Running a 1-point CDV Test

To run a 1-point CDV test:
1. Press the
2. Make sure that the
press
ENTER
3. Press the
line, as in the following:
The
1Pt Cel Dly Var
correspond to the four receive filters.
6-68
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
. You see this display:
STS-3c SETUP:
- - - - - - - - - - - - - - - - - - - - - - -
Path Auto YEL
Line Auto FERF
Note
PCR
). You can change this form to a percent
). For information on how to do this, see "Changing
CPS
field. Press the arrow keys to supply the desired
to save the change.
ENTER
key. The
ATM ATM SELECTIONS
Quality of Service
. The
QUALITY OF SERVICE
key to move the
Down Arrow
QUALITY OF SERVICE
Cell Loss
1Pt Cel Dly Var
2Pt Cel Dly Var
option has four settings (1-4), which respectively
OFF
OFF
value is in megabits per
) or cells
(%BW
PCR
menu is displayed.
option is on the selection line. Then,
submenu is displayed.
option to the selection
1PT Cel Dly Var
1
1
za015f.eps
value. When
za151f.eps