Table of Contents
Advertisement
7. Press the
Down Arrow
This option defines the percentage of active-to-idle cells transmitted (in other
words, the percent bandwidth).
The default form for expressing the
second (
). You can change the representation to a percent
MBS
) or cells per second (
(%BW
see "Changing the Form for Expressing the PCR and SCR" in
Chapter 5.
8. Press the
EDIT
you finish to save the change.
9. Press the
Down Arrow
the selection line:
TRANSMIT STREAM:
SCR: 000000.00 MBPS
MBS: 0010 Cells
CDV LIM: 020.00 Cls
This option determines the number of cells the master sends to the slave unit
as a trigger.
10. Press the
EDIT
you finish to save the change.
The master unit is now configured with both an address for the trigger burst
transmission and the number of cells to send as a trigger.
Step 2: Specify the number of cells to expect from the slave unit.
1.
Scroll to the top of the menu, then press the
setup menu for
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
key to move the
PCR
Note
value is in megabits per
PCR
). For information on how to do this,
CPS
key and enter a value for the
key to move the
MBS
key and enter a value for the
TRANSMIT STREAM 1.
Testing ATM Networks
Quality of Service Tests
option to the selection line.
option. Press
PCR
ENTER
(Maximum Burst Size) option to
2
option. Press
MBS
ENTER
key to display the
Left Arrow
6
when
za142f.eps
when
6-55
Advertisement
Table of Contents
