Table of Contents
Advertisement
OC3port Plus
User Manual
15. Press the
selection line. Press
displayed:
The IP Ping test is conducted on TRANSMIT STREAM 1. Therefore,
make sure that you display the setup menu for this transmission
stream.
16. Program TRANSMIT STREAM 1 with the desired header information.
The OC3port Plus uses the VPI / VCI specified for TRANSMIT
STREAM 1 to transmit IP Ping messages and to monitor responses
to those messages. Therefore, for the OC3port Plus to detect a
response from the device under test, that response must be sent back
to the tester on the same VPI / VCI.
17. Press the
18. Press the
line:
6-84
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
key to move the
Down Arrow
. The setup menu for
ENTER
TRANSMIT STREAM:
or
for Change
NAME:XMITHDR_1
SOURCE OFF
Note
Note
key again. You return to the
ATM
key to move the
Down Arrow
ATM SELECTIONS:
Load XMIT Streams
ATM XMIT Mode
Cell Capture
option to the
Setup XMIT Streams
TRANSMIT STREAM 1
1
menu.
ATM SELECTIONS
option to the selection
ATM XMIT Mode
STR
is
za167f.eps
za168f.eps
Advertisement
Table of Contents
