Table of Contents
Advertisement
10. Press the
or
Left
destination address in the IP ADDRESS TABLE.
11. Press the
Down Arrow
Then, press
ENTER
IP PING SETUP
- - - - - - - - - - - - - - - - - - - - - - - -
Rate: 001.000
Timeout: 01.0
This menu has the following options:
•
Rate
To use this option, you must set the
to
(This is done later in this procedure.)
STR.
•
Timeout Determines how long the OC3port Plus waits for the
12. Press the
key to enter Edit mode and change the value of the
EDIT
Make sure that you press
13. Press the
Down Arrow
Then, press the
Timeout option. When you finish, press
14. Press the
key. The
ATM
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
key to select the setting that corresponds to the
Right Arrow
key to move the
Ping Setup
. The
menu is displayed:
IP PING SETUP
Determines how frequently the OC3port Plus sends a
message to the destination address. The default rate is one IP
message per second.
Note
ATM XMIT Mode
destination address to respond to an IP message. If no response
is received within the specified time period, you may have to
increase the value for Timeout. If no response is received
within a reasonable amount of time for the network under test,
you can assume that the device is not connected.
when you finish to save the change.
ENTER
key to move the Timeout option to the selection line.
key to enter Edit mode and change the value of the
EDIT
ENTER
ATM SELECTIONS
Testing ATM Networks
IP Ping Test
option to the selection line.
option's setting
Rate
to save the change.
menu is displayed.
6
za166f.eps
option.
6-83
Advertisement
Table of Contents
