Table of Contents
Advertisement
OC3port Plus
User Manual
Running a Cell Transfer Delay Test
To run a Cell Transfer Delay Test, do the following:
1. Press the
2. Press the
line. Then, press
3. Press the
line:
This option has eight settings (1-8), which respectively represent the eight
available transmission streams.
4. Press the
Then, press
LOADING SELECTED TRAFFIC PATTERN message on the LCD.
After loading the requested transmission pattern, the OC3port Plus displays
results to you on the LCD. See "Understanding Cell Transfer Delay Test
Results", which follows, for an explanation of the result display.
6-74
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
key. The
ATM
ATM SELECTIONS
key to move the
Down Arrow
. The
ENTER
QUALITY OF SERVICE
QUALITY OF SERVICE
- - - - - - - - - - - - - - - - - - - - - - - -
Cell Loss
1Pt Cel Dly Var
key to move the
Down Arrow
2 PT CELL DELAY VAR
STATUS: PROCESSING
PEAK TO PEAK CDV
0.09ct
or
key to select the desired transmission stream.
Left
Right Arrow
. The Cell Transfer Delay Test begins. You see the
ENTER
menu is displayed.
option to the selection
Quality of Service
submenu is displayed:
1
option to the selection
Cell Xfer Delay
za134f.eps
za154f.eps
Advertisement
Table of Contents
