Table of Contents
Advertisement
OC3port Plus
Users Manual
4. Make sure that the name of the group whose records you want to delete is on
the selection line. Then, press
All of the tests in the group you selected are deleted from the tester's memory.
Printing, Downloading, and Remote Control
On its connector panel, the OC3port Plus has an EIA-232 serial port, which is
designed into an RJ-11 (telephone) jack. With this port, you can:
•
Connect the OC3port Plus to a serial printer.
•
Connect the OC3port Plus to a PC that is running any standard
communications terminal program (such as Procomm or Crosstalk) and
capture test results and configuration information.
•
Control the operation of the OC3port Plus remotely.
The information in this section shows you how to set up your OC3port Plus for
printing and remote control operation.
Connecting to the Serial Port
To connect your OC3port Plus to a computer, printer, or modem you need the
following equipment, which is supplied with the OC3port Plus:
•
RJ-11 to RJ-11 cable
•
RJ-11 to DB-25s female adapter for connection to a computer
•
RJ-11 to DB-25s male adapter for connection to modems and printers
•
RJ-11 to DB-9 female adapter.
To assist you in establishing working connections, Tables 3-2, 3-3, and 3-4 are
provided, which describe the serial control signals available at the RJ-11 connector
and 25-pin computer and modem/printer connectors.
3-26
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
DELETE RECORDS:
- - - - - - - - - - - - - - - - - - - - - - - -
Bert
Cell Loss
ENTER
.
za035f.eps
Advertisement
Table of Contents
