Table of Contents
Advertisement
The scrolling behavior of the
programmable. The examples in this book assume that you are using
the default scrolling method, which is
this scrolling method, see "Changing the Default Scrolling Method"
in Chapter 3.
When you press the
the fourth line of the display moves up to the selection line. If you continue to
press this key, you eventually reach the end-of-menu bar, and the unit "beeps" if
you try to go past this point. To scroll in the opposite direction, press the Up
Arrow key.
Changing the Setting for an Option
The
and
Left
Right Arrow
OC3port Plus menus. The following example shows you how to use these keys to
change the setting for an option.
1. Press the
or
Up
change to the selection line. For example:
OPTION
- - - - - - - - - - - - - - - - - - - - - - -
Parameter Set
RS-232 Speed
Note that the
arrow to its left.
2. Press the
Left
(in this example, the ) changes to one of the other available settings for this
option. Continue pressing the arrow key until the setting you want is displayed.
The change takes effect immediately. The value you display by pressing the
or
Left
Right Arrow
selection line.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Getting Acquainted with the OC3port Plus Menus
Note
and
Up
Down Arrow
WIN
key, the menu selection that was previously on
Down Arrow
keys are used to change the settings for options found on
key to move the option whose setting you want to
Down Arrow
SELECTIONS
option is on the selection line as indicated by the
Parameter Set
or
key. Notice that the value of the current setting
Right Arrow
key becomes the current setting for the option that is on the
Getting Started
keys is user-
(for Windows). To change
1
96
2
za008f.eps
2-15
Advertisement
Table of Contents
