Table of Contents
Advertisement
Step One: Set up the boundaries of the search
To set up the boundaries of the scan, do the following:
1. Press the
AUTO
2. Press the
Down Arrow
selection line. Then, press
displayed:
ATM ACTIVITY SCAN:
- - - - - - - - - - - - - - - - - - - - - - -
Start Activity Scan
Setup Activity Scan
3. Press the
Down Arrow
selection line. Then, press
displayed:
AUTO-SCAN PARAMETERS
- - - - - - - - - - - - - - - - - - - - - - -
VPI MIN: 0000
VPI MAX: 0255
From this submenu, you can set the search boundaries to limit the address
space over which the OC3port Plus searches for ATM activity. There are four
items that you can edit:
0000
VPI MIN:
0255
VPI MAX:
00000
VCI MIN:
65535 Maximum virtual circuit address to end the search with.
VCI MAX:
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
key. The
AUTO SELECTIONS
key to move the
ATM Activity Scan
. The
ENTER
ATM ACTIVITY SCAN
key to move the
Setup Activity Scan
. The
ENTER
AUTO-SCAN PARAMETERS
Minimum virtual path address to begin the search with.
Maximum virtual path address to end the search with.
Minimum virtual circuit address to begin the search with.
Testing ATM Networks
Scanning Circuits for ATM Activity
menu is displayed.
option to the
submenu is
option to the
submenu is
6
za115f.eps
za116f.eps
6-35
Advertisement
Table of Contents
