Table of Contents
Advertisement
OC3port Plus
Users Manual
Do not disconnect the AC adapter/charger while the
OC3port Plus is powered on. Doing so can result in the
corruption of current or stored test results.
Only an AC adapter/charger supplied by Fluke can safely
be used with the OC3port Plus. Use of any other adapter
voids your warranty and can damage the tester.
Network connectors. The IN and OUT connector jacks are
attached to the OC3 network. Depending on the type of
interface, you will attach single-mode, multi-mode, or
twisted pair connections to these jacks.
EIA-232 serial port. This is a RJ-11 female jack that
accepts the Fluke-supplied serial conversion cable. Using
this cable, you can download to a PC or a printer and
upload the latest version of OC3port Plus software.
The Front Panel
The front panel contains four main sections:
•
LCD
•
Direct access keys
•
Status section
•
System keys
Descriptions of these sections follow.
The LCD
The LCD is located at the top of the tester. It is a four-line by 20-character back-
light display that presents the OC3port Plus menus, test configurations, and results
of specific tests.
2-4
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Warning
Advertisement
Table of Contents
