Table of Contents
Advertisement
OC3port Plus
User Manual
The OC3port Plus has two cell capture filters, A and B, which are used to
control the capturing of cells. You can set each capture filter to match any one
of the four receive filters, or you can set both capture filters to match the same
receive filter. By default, both filters are set to
5. With the
key to set it to the desired receive filter.
Arrow
6. Press the
line. Then, press the
filter.
7. Press the
trigger conditions (the criteria for storing cells):
•
Trigger On Cnd1
•
Or Cnd2
For example:
These two options are used together. They set up an either/or condition for
determining the criteria for storing cells.
Trigger On Cnd
•
ANY
•
A
•
!A
•
OFF
6-24
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
option on the selection line, press the
Set A to Filter
key to move the
Down Arrow
or
Left
Right Arrow
key to locate the following options, which represent the
Down Arrow
CELL CAPTURE
Trigger On Cnd1 ANY
Or Cnd2 OFF
Store Mtch Cnd1 ALL
1 has these settings:
Begins storing cells when any ATM cell is received.
Begins storing cells when a cell matching the receive filter set for
capture filter A is received.
Begins storing cells when a cell matching any receive filter
except the one set for capture filter A is received.
Tells the OC3port Plus not to evaluate this condition.
RECEIVE FILTER 1
Left
option to the selection
Set B to Filter
key to set it to the desired receive
.
or
Right
za092f.eps
Advertisement
Table of Contents
