Table of Contents
Advertisement
OC3port Plus
User Manual
4. Press the
Down Arrow
line. Press
5. Set up TRANSMIT STREAM 1's parameters.
TRANSMIT STREAM 1 must be configured correctly because it is
the "source" of the Cell Loss test stream.
6. Press the
Down Arrow
7. Press
ENTER
6-48
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
key to return to the
ATM
ATM SELECTIONS
key to move the
Setup XMIT Streams
to display the setup menu for
ENTER
TRANSMIT STREAM:
or
for Change
NAME:XMITHDR_1
SOURCE CBR
Note
key to return to the
ATM
ATM SELECTIONS
key to move the
Quality of Service
ATM SELECTIONS:
Cell Capture
Quality of Service
OAM Transmit
. The
QUALITY OF SERVICE
QUALITY OF SERVICE
- - - - - - - - - - - - - - - - - - - - - - - -
Cell Loss
1Pt Cel Dly Var
menu. Then, press the
parameter to the selection
TRANSMIT STREAM 1
1
menu. Then, press the
option to the selection line:
submenu is displayed:
1
:
za063f.eps
za133f.eps
za134f.eps
Advertisement
Table of Contents
