Table of Contents
Advertisement
Introduction
This chapter covers the basics of setting up and operating the OC3port Plus. The
first section shows you how to program the overall operation of the tester to
configure such elements as the scrolling method and the status of the key beeping
mechanism and how to set the date and time. It also shows you how to create
parameter sets so that you can store different but commonly used configurations in
separate groups and switch quickly between groups.
The second section covers basic OC3port Plus operations. You learn how to turn
on the unit and perform such fundamental tasks as clearing the display, resetting
the unit, storing and retrieving test results, and running diagnostic tests.
Programming the Overall Operation of the OC3port Plus
The OC3port Plus has a number of programmable setup options that enable you to
determine its overall operating characteristics. Any settings that you choose for
these options when you configure the OC3port Plus are stored in internal memory
so that even when you shut off the tester, you do not lose valuable configuration
information.
Following is a list of OC3port Plus setup options available for you to change:
•
Scroll method
Determines the behavior of the arrow keys when you scroll through menus.
•
Buzzer operation
Enables/disables the sounding of a warning buzzer whenever you press an
invalid key.
•
Date/time setting
Sets the system date and time.
•
Communications speed
Sets the baud rate.
•
Automatic tests
Enable/disable the execution of a series of automatic diagnostic tests when you
power on the tester.
•
Parameter sets
Store two different configuration sets under the respective labels, Parameter
Set 1 and 2.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Setting Up and Operating the OC3port Plus
3
Introduction
3-3
Advertisement
Table of Contents
