Table of Contents
Advertisement
has these three settings:
Or Cnd2
•
Tells the OC3port Plus not to evaluate this condition.
OFF
•
B
Begins storing cells when a cell matching capture filter B's
receive filter is received.
•
Begins storing cells when a cell matching any receive filter
!B
except the one set for capture filter B is received.
8. With the
Trigger On Cnd1
key to set the desired trigger condition.
9. Press the
Down Arrow
Then, press the
10. Press the
Down Arrow
•
Store Mtch Cnd1
•
Or Cnd2
For example:
CELL CAPTURE
Store Mtch Cnd1 ALL
Store Payload
These options determine which cells the OC3port Plus stores in the capture
buffer after the trigger condition is met.
Store Mtch Cnd1
•
Stores all cells received.
ALL
•
Stores only the cells that match the receive filter set for capture
A
filter A.
•
Stores cells that match any receive filter except the receive filter
!A
set for capture filter A.
•
Tells the OC3port Plus not to evaluate this condition.
OFF
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
on the selection line, press the
key to move the
Or Cnd2
or
key to set its trigger condition.
Left
Right Arrow
key to locate these next two setup options:
Or Cnd2 OFF
OFF
has these four settings:
Testing ATM Networks
Monitoring an ATM Network
or
Left
Right Arrow
option to the selection line.
6
za095f.eps
6-17
Advertisement
Table of Contents
