Table of Contents
Advertisement
Capture Type
Header and payload
Header and first 3 bytes of payload
Header only
Configuring the OC3port Plus for Capturing ATM Cells
To configure the tester to capture ATM cells, first set up a receive filter with the
appropriate header information.
Then, do the following:
1. Program the OC3port Plus with the desired trigger condition (criteria for
determining which cells to capture).
2. Set the storage controls (which cells to store).
The following procedure steps you through this part of the process.
1. Press the
ATM
2. Press the
Down Arrow
3. Press
. The
ENTER
CELL CAPTURE
Trigger On Cnd1 ANY
Store Mtch Cnd1 ALL
CELL CAPTURE
- - - - - - - - - - - - - - - - - - - - - - - -
Start Cell Capture
Review Cell Capture
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Table 6-1. Captured Buffer Size
Qty -- Timestamp OFF
630
4681
8192
key. The
ATM SELECTIONS
key to move the
Cell Capture
submenu is displayed:
CELL CAPTURE
Or Cnd2 OFF
Testing ATM Networks
Monitoring an ATM Network
Qty -- Timestamp ABS / REL
595
3276
4681
menu is displayed.
option to the selection line.
6
za092f.eps
za093f.eps
6-15
Advertisement
Table of Contents
