Advertisement
Quick Links
OptiView
The OPV-FT600 OptiView FiberInspector Pro Video Probe
connects to an OptiView Integrated Network Analyzer to let you
inspect the ends of fiber optic connectors. The probe's 250X and
400X magnifications reveal dirt, scratches, and other defects that
can cause poor performance or failures in fiber optic networks.
The video probe comes with the following:
•
FT650 fiber probe with NTSC to USB conversion box
•
Probe adapter tips (ST, SC, FC, and universal 2.5 mm patch
cord tip)
•
Installation guide
If anything is missing or damaged, contact the place of purchase
immediately.
Safety Information
To avoid possible eye damage caused by hazardous
radiation, never look directly into optical output
connectors. Some sources produce invisible radiation that
can permanently damage your eyes.
To avoid possible fire, electric shock, or personal injury, do
not open the case; no user-serviceable parts are inside.
PN 2114383 May 2004
© 2004 Fluke Corporation. All rights reserved. Printed in USA.
All product names are trademarks of their respective companies.
FiberInspector
™
I ns t a l l a t i o n G u i de
W *X
Warning
OPV-FT600
Video Probe
™
Advertisement
Related Manuals for Fluke OptiView FiberInspector OPV-FT600
Summary of Contents for Fluke OptiView FiberInspector OPV-FT600
- Page 1 To avoid possible fire, electric shock, or personal injury, do not open the case; no user-serviceable parts are inside. PN 2114383 May 2004 © 2004 Fluke Corporation. All rights reserved. Printed in USA. All product names are trademarks of their respective companies.
- Page 2 Connecting the Probe and Attaching an Adapter Tip Caution Some adapter tips have small screws that slide into a slot on the probe end. Do not adjust this screw. Connect the cable from the fiber probe’s conversion box to one of the OptiView analyzer’s USB ports (Figure 1). If this is the first time using FiberInspector, the “Found New Hardware”...
- Page 3 ETHERNET LINK TRANSMIT COLLISION ERROR %UTILIZATION PRO GIGABIT Conversion Adapter tip (match connector to be inspected) Focus control Magnification control ajv01f.eps Figure 1. Connecting the Probe and Attaching an Adapter Tip Using the FiberInspector Software on the OptiView Series II Analyzer Start the FiberInspector software by double-clicking on the OptiView FiberInspector icon , and then pressing the...
- Page 4 ajv03f.wmf Figure 2. Selecting “Custom Session” On the Source tab (Figure 3) select Video and deselect Audio. Select Westover USB Video Capture from the Video drop- down list, then press Apply. Select Westover USB Video Capture Select Video Deselect Audio Press Apply ajv02f.wmf...
- Page 5 Figure 4. Fiber Endface Example Registration Registering your product with Fluke Networks gives you access to valuable information on product updates, troubleshooting tips, and other support services. To register, fill out and return the postage-paid card provided, or fill out the online registration form on the Fluke Networks website at www.flukenetworks.com/registration.
-
Page 6: Contacting Fluke Networks
Clean the case with a soft cloth dampened with water or a mild detergent. Do not use solvents or abrasive cleansers. Getting Service Contact Fluke Networks for information on authorized Fluke Networks service centers. Accessories and Replacement Parts The following accessories and replacement parts are available from Fluke Networks for the OPV-FT600 FiberInspector probe. -
Page 7: Specifications
Specifications Magnification 250X and 400X Camera type 0.33 in (8.38 mm) CCD with adjustable focus Light source Interface NTSC to USB conversion box Power source Powered by the OptiView analyzer via the conversion box Lighting Coaxial technique Dimensions Probe: 1.8 in x 1.7 in x 5.5 in (45.7 mm x 43.2 mm x 140 mm) (length depends on adapter tip) Conversion box: 6 in x 2.3 in x 0.7 in... - Page 8 LIMITED WARRANTY & LIMITATION OF LIABILITY Fluke Networks products will be free from defects in material and workmanship for one year from the date of purchase. Parts, accessories, product repairs and services are warranted for 90 days. This warranty does not cover disposable batteries, cable connector tabs, cable...
Need help?
Do you have a question about the OptiView FiberInspector OPV-FT600 and is the answer not in the manual?
Questions and answers