Table of Contents
Advertisement
Show Test Results
To show test results in the display:
1.
Push .
2.
Push or to highlight a test results name.
Push softkey F1 to toggle between sort results by
date or sort A-Z.
3.
Push to show the test and its results in the
display.
4.
Push or to highlight a test result.
5.
Push to show the test results in the display.
6.
Push the Back softkey to go back to the test results
list.
A USB keyboard or barcode reader can be used
to edit the test results name.
When you push the Start Test Sequence softkey, the
complete test sequence starts.
Note
Note
Print Test Results
With a PCL5 compatible printer connected to the USB A
Controller Port, you can print a test results record on a
letter or A4 sheet of paper. With a ZPL II-compatible label
printer connected to the USB A Controller Port, you can
print a 3 in. x 2 in. (76.2 mm x 50.8 mm) label
summarizing the test result.
A compatible printer must be connected to the
Product before the Print softkey appears in the
view screen of a test results record.
1.
Do the steps in Show Test Results through Step 3 to
show the test and its results on the display.
2.
Push the Print softkey.
The data in the test results record that show on the
display is transmitted through the printer port.
Electrical Safety Analyzer
Test Sequences
Note
59
Advertisement
Table of Contents
